2020 Red Paddle Co 9’6″ x 34″ x 5.9″ Wild
What’s new for 2020?
- Cargo area bungee extends to the 6 tie down points
- Updated accessory mount size, now using M6 or 1/4-20 thread with 0.375″ depth – more information here
- New deck graphics and rail graphics/colors
- Piece of mind: Register your new board with Red Paddle Co to get your warranty coverage extended to 5 years
MSL – Monocoque Structural Laminate
What is MSL? Monocoque Structural Laminate (MSL) fusion composite and airtight coating is a new construction process introduced in 2016. MSL involves fusing the second layer of hard-wearing polymer to the dropstitch core at the raw material stage, removing hand gluing errors. The high-tech industrial process also saves up to 5 lbs of weight per board and makes the boards stiffer at lower pressures.
The difference is in the detail. By looking at all of the individual elements of drop stitch Red Paddle Co have been able to develop a refined process to improve all aspects of board production.
Firstly Red Paddle Co have removed the process of coating the inner thread section with molten PVC – for them this was a redundant process, as they had no interest in producing a single layer board and only served as a base to glue our outer/double layer too. It was also a messy process with very little control. Instead they coat the thread structure in a layer of adhesive that has been specially formulated to create both a seal and a bonding layer. Red Paddle Co then machine laminate a layer or high density structural PVC to this adhesive layer under controlled conditions – completely removing the human factor involved in traditional double layer application.
This entire process is done at the raw material stage by carefully calibrated machinery developed for this process specifically. The result is a consistent and high level cosmetic finish that has all of the durability and strength properties of our previous double layer construction. And because this process is done at the raw material stage Red Paddle Co is now able to benefit from torsional stiffness as the material is put under tension when the board is inflated.
It all sounds simple but like the best single malt whiskey or a finely tuned engine the components and method have needed to be refined over and over again until they created the ultimate blend of performance, quality and weight.
So what are the benefits to paddlers?
- Cosmetic finish – All Red Paddle Co boards have an industry leading cosmetic finish. No wrinkles or blemishes. The boards look cleaner and smoother, and even feel better to the touch.
- Lighter – All Red Paddle Co boards are up to 5 lbs or 2 kgs lighter than many competitors. But very importantly they are not too light. If a board is ultra light or too light, it is more affected by wind and current while on the water. MSL boards have a lightweight yet reassuring feel.
- Stiffer at lower pressures – Due to the Torsional Stiffness effect, all Red Paddle Co boards are stiffer at lower pressures. Red Paddle Co recommend a pressure of between 16-22psi. Less pumping more paddling.
Classic Board Bag
There’s no better way to explore your world than with an inflatable SUP – bag it up, throw it on your back and you’re ready for an adventure.
At Red Paddle Co, they pride themselves on creating an authentic paddling experience, which means all of their kit has to perform to an exceptional standard – whether that’s on the water, or when you’re travelling and transporting your board, paddle and pump with you.
No bag existed that met their demands – so they created our own. It’s the world’s best inflatable SUP bag, an innovative backpack designed to make taking your board to the farthest corners of the Earth as easy as possible. It’s made using toughened materials that can cope with sun, sea and sand (and baggage handlers). When you’re not out exploring, it serves as the perfect storage unit, too.
- Front loading feature = easy loading and unloading
- Integrated wheels = makes travelling with your Red even easier
- Internal load straps = holds the board in place for comfortable carrying
- Padded backpack straps = Super comfortable
- Waist strap = ensures the bag stays in the optimum position for carrying
- Side grasp handles = pick the bag up anyway you want
- Foil lined bag to protect board from extreme temperatures
- Dimensions: 38 x 14 x 12 inches.
The Titan Pump features two chambers, one larger volume cylinder (low pressure) and one lower volume cylinder (high pressure). Think of it as a combination of the regular Ezee and the Ezee HP side by side.
You start with both cylinders pumping huge amounts of air into the board, then at about 10PSI, you remove the handle located plug and it pumps through the high pressure side only. You’re pumping double the amount of air into the board than usual, and can still finish it off with high pressure.
The Titan Pump could easily be the best development in inflatable stand up paddle products throughout the entire market let alone the industry leading Red Paddle Co range. The ability to inflate your SUP faster and also without switching pumps and still attain the higher pressure easily, is making a monumental difference to the performance and satisfaction of your paddle boarding experience.
Put simply, we don’t use electric pumps as the Titan Pump gets the board to higher pressures, faster.
- 65 inch hose with Red Paddle Co/Halkey Roberts valve nozzle
- Various adaptors for other inflatables
- Pressure gauge registers to 30PSI
- Pump dimensions: 25 inches tall x 12 inches wide with a 4-inch barrel and a 3.5-inch barrel
- Pump volume of 4.71l using both cyclinders
- Weight: 5 lbs
Other Red Paddle Co Features
Tec Air is not a product it’s a process. By focussing in on the key areas of the production process Red Paddle Co have been able to identify ways they can improve the end result. Whether it be detailing exactly where and how the layers are bonded or how the rocker curve is applied to the board, no area of the design process is ignored. The key areas of construction are inside the board. Red Paddle Co’s attention to detail on the inside ensures the best experience on the outside.
They use only the highest quality drop stitch. Drop stitch is the name given to the material inside an inflatable board. Red Paddle Co boards are built using specially produced, high density drop stitch that makes for a stronger and stiffer core. Take a look on the outside of a Red Paddle Co board you will see thousands of dimples spread from nose to tail and rail to rail. Each dimple represents an internal thread. Red Paddle Co does not use linear drop stitch which is a mass produced, cheap material that cannot hold high pressure. Linear boards can be identified by the straight lines of dimples on the board.
First of all, Red Paddle Co use a machine to weave the inner core. Next they cover the woven surface in an adhesive that both seals the woven material so it is air tight, and adheres to the second layer, which is applied in next stage of the process, see MSL above. They then attach the deck pad, fins and other parts to the outer layer.
Many boards in the Red Paddle Co range come with built-in fins – the high-performance iFin system. With moulded fins you don’t need any tools, replacements or spares. They are specially designed to be ultra-durable and easy to pack away for transport. If they ever bend out of shape during storage or use, it is extremely easy to set them straight again, simply pour hot water over the fins and reshape them by hand.
US Fin Box
US Box Fins originated in the surfing world where they are widely trusted to do a great job. A number of Red Paddle Co boards use them, including all of the Elite race boards, Voyagers, Sports, Whip, Wild, Dragon, as well as the Wind and Windsurf boards. While no US box fin comes as standard with this board, the fin box is available to use to aid tracking.
Warranty – 5 years with registration
All Red Paddle Co products come with a 12-month warranty against manufacturing defects, by registering your board with Red Paddle Co you are upgraded to a free 5 year warranty.
- The Titan Pump – a revolutionary dual chamber inflatable paddle board pump that will inflate your board in half the time with half the effort, and still pump to 25PSI easily.
- MSL fusion composite and airtight coating
- High-grade, double-thread internal high density drop stitching which can handle up to 25PSI
- Double layer fusion construction featuring a “board within a board”. This adds “bomb-proof-ness,” massive strength, stiffness, consistent shape and mega durability
- Red Paddle Co Original Classic Backpack – 38 x 14 x 12 inches
- Side rails with four layers of taping – maintains the boards shape, stiffness and air tight qualities. Four times thicker than many inflatable paddle boards
- Special “air block” membrane eliminates air leakage
- Four tracking iFins for the best mix of directional stability and control
- Center US fin box for optional fin
- Integrated nose handle and d-ring with Ram Mount and Railblaza Mounting System for camera and accessories
- Integrated tail handle and d-ring for leash
- Center and rail carry handles offer safety and control
- Low profile handles so no risk of injury
- Super traction, non-slip EVA full coverage deck pad
- Built using Tec Air specification, with new valves, improved seals, cap and stronger threads
- Length: 9’6″
- Width: 34″
- Thickness: 150mm, 5.90 inches
- Volume: 294 liters
- Weight: 24 lbs board only, 33 lbs with backpack and pump
- Max payload: 265 lbs/120 kgs
- Warranty: 1 year, 5 years with product registration
What’s in the box? The 9’6″ Wild comes complete with an awesome wheeled backpack, a repair kit, cell phone case and the Red Paddle Co Titan pump, which makes inflation to 15-25psi really easy, leaving you more time to paddle.
Warning: Always wear a waist leash and PFD on fast flowing water. If in doubt, don’t go out.