2020 Red Paddle Co 10’6″ RideFrom: $1299.00
2020 Red Paddle Co 10’6″ Ride Special EditionFrom: $1299.00
Along side the regular 10’6″ Ride for 2020, we have the 10’6″ Ride Special Edition. This eye catching purple trimmed board was first introduced to celebrate Red Paddle Co ‘s 10th anniversary in 2018 and has stayed on as a popular alternative to the standard blue. In 2008, Red Paddle Co started out as a pioneer in the industry focusing on just inflatable stand up paddle boards, and today, they are the market leaders in terms of technology, quality and performance. (The only difference with the 10’6″ Ride Special Edition is the color, the board has the same specifications and comes with the same things as the regular 10’6″ Ride.) With this color difference in mind, this review is valid for both boards.
Note: This article is a review of the 10’6″ Ride (and the 10’6″ Ride Special Edition), for more info on how to set up and use the board, please see our knowledge base area or view the Red Paddle Co User Manual.
So what exactly have they updated for 2020? What features have they changed, what details are refined, are the boards better? Should I get a 2020 10’6″ Ride or stick with a 2019 model? In an attempt to answer these questions, let’s begin with the 2020 Red Paddle Co 10’6″ Ride review and videos.
Red Paddle Co in 2020
For 2020, Red Paddle Co has made range small changes to the graphics, colors and accessory mounts on the boards. Offering a more eye catching and eye pleasing range of boards, they have aligned their position of using market leading technology with some of the best looking boards available.
The 2020 Red Paddle Co All Terrain inflatable sup bag is charcoal in color with red stitching. It features an internal mesh pocket, used for a leash, fin, keys etc, on the inside of the front flap. It also has paddle bungee tie downs for a 3 piece paddle against the back. The bag is lined in foil and features the solid zipper pulls.The foil lining improves the heat protection of the board if you leave it in your car or in a hot climate, and doubles as a waterproof lining so your wet gear won’t leak out of the bag after a session.
Bag dimensions remain the same at: 37″ high, 14″ wide and 12″ deep.
Space is aplenty for the Titan pump, a 3 piece paddle, leash and even wetsuit, PFD etc. The Titan Pump comes with the board wrapped around it which is a great space saving technique and something I continue to do. It also keeps the pump secure with the board when cinched down. With previous pumps, this wasn’t such an issue but as the Titan is a little bulkier it makes sense to use the space inside the rolled up board for something, keep it secure in the bag and have room for more. I’ll get into this more later in this review but thanks to the MSL Fusion construction process, the board also rolls tighter leaving you even more room in the bag for extras.
Carry handles on both sides, as well as the top and bottom give you, and baggage handlers, plenty of places to grab and carry the bag. The Sherpa system allows you to carry the bag on your back with comfortable shoulder and waist straps, or tuck them away out of sight and away from hungry baggage carousel gremlins and just roll the bag on the integrated wheels and be confident the bag will arrive safely. See more photos of the bag here.
As packaged from the factory the board is protected by a layer of plastic (or paper) to separate the board from itself when rolled, small cardboard fin protectors to help them keep shape, the Titan pump in its own bag and a bag that bundles the whole lot. The fins are very durable but if they are bent when you get the board, they can be straightened easily when heated. Read more here about straightening iFins.
The majority of the Red Paddle Co line now comes standard with the improved and more efficient Titan Pump. Overall the Titan makes pumping the board a much quicker process. The angled foot base and wide handle work well for me with my long legs and wide shoulders.
I always found the Ezee and Ezee HP a little small to get my frame around, sort of akin to an elephant trying to ride a bike. Anyway, Red have taken into account some of the ergonomics for comfortable and efficient inflation as well as doubling the input volume of air with every stroke.
Pump up to about 8-10 PSI on the included gauge and then you pull the red plug out of the back of the handle, affix to the little nub so it doesn’t flap around, and continue on the HP side to go all the way to 25 PSI if you like. Recommended inflation pressure is 18-22 PSI, but I find 20 PSI to be a good trade off between stiffness and not having to pump too much. The Titan still beats any electric pump I’ve come across in inflation time, but yes, you do have to do the work…
Inflating the 2020 10’6″ Red Air Ride to 20 PSI took me only 3 minutes. The Titan pump really pumps the air in quickly to start with, then about 8-10PSI you pop the plug and finish it up with the high pressure cylinder.
The 2017 Titan Pump had been totally reworked internally and was even more efficient. The 2020 model continues with the improved handle design, beefier internal valves, hose adaptors for your favourite inflatable toys, it pumps even more smoothly and efficiently.
Dimensionally, the board is the same as previous years: 10’6″ long, 32″ wide and 4.72″ thick and construction wise it is the same industry leading MSL Fusion. Visually, a small update with changed deck and rail graphics, fitting in with the deck graphics is the diamond cut groove tail pad that extends in the center providing better awareness of footing. In addition to the accessory mount thread size change, (M8 to M6 for 2020), the nose includes a grab handle. On the underside you still have the d-ring for anchoring or light towing. The carry handles continue with their lightweight but padded EVA grip.
This process consists of industrially fusing and machine pressing the inner layer of polymer to the high density drop stitch core at the raw material stage. Same “board with a board” construction but with material that is now structurally more sound, even more rigid, as well as lighter. More details about MSL over here. Red Paddle Co have constantly refined the MSL construction, tweaking materials, thickness and bond strength which means they’ve all but stopped batch inconsistencies and it allows them to make boards from the most advanced drop stitch available, without any unnecessary excess or errors.
I’m 190lbs and I usually pump my 10’6″ Ride to 20 PSI. I find this is a good balance between time pumping and on water performance.
For a direct comparison of the 2018/19 (left) and 2020 10’6″ Rides (right), move the slider to see the changes.
Red Paddle Co have famously tested the durability and toughness of their boards over the years. Most recently you can watch a series of unbelievable durability tests performed on a poor 2017 10’6″ Ride model. Also, take a look at a 2014 board taking a beating. Knowing that the Red Paddle Co MSL construction boards are this strong, should put your mind at ease!
So, the board is exceedingly tough and durable, but at what cost? I put the 2020 Red Paddle Co 10’6″ Ride on the scales and it weighed in at 22lbs. For reference, the 2015 board and other double layer boards on the market, weigh in at 27lbs or more. That’s a 20% weight saving. This is a significant weight saving and is immediately apparent when you lift the board out of the box. Then when you have it inflated and carry to the water, much easier. On the water too, more responsive and easier to paddle. However, Red Paddle Co are careful not to make the boards too light. Yes, there is such a thing. Obviously the weight is there for rigidity and performance reasons, but we also need some weight in the board to control it in rougher waters or wind. A board with some weight is predictable and stable making it better suited to all paddlers.
Up a little closer we can once again see the edges of the material are cleanly cut, the glue lines that often wander on inferior brands are all perfectly straight thanks to the robots. To continue the attention to detail, the 6 tie-down d-rings are stainless steel with heavy duty bungee cord. The center carry handle is padded but no longer features the outer decal to improove the comfort and softness. There is also an updated carry handle integrated into the leash d-ring on the tail which is excellent for pulling the board through waves, up the beach or generally just holding on etc.
On the 2020 10’6″ Ride, the mount is integrated into the nose mounted handle and d-ring. For more info on the accessory mounts and parts view our inflatable paddle board accessory mount guide here.
The built in, super durable fins, or iFins, for 2020 remain in the same position which promotes better all round performance. The toe-in style of the 2 forward fins in the tri-fin or thruster arrangement helps the board perform and make turns in the waves. The slightly further back position of these 2 fins (the change made back for the 2017 model) improves the tracking for flat water paddling and general cruising. The centre fin was moved slightly forward for the same reasons. An extra benefit of the new “closer together” positioning is a tighter roll up of the board.
The Red Paddle Co logos on the top and underside of the nose are screen printed on rather than a PVC layer in itself, further saving weight.
The package includes a repair kit with glue and patches, a waterproof phone case, and a general guide book with inflation instructions, pump tips and care tips inside the mesh pocket. Finally, a wrapping strap to keep the board rolled up.
On the water
A mostly unchanged experience for 2020 compared to the previous 4 years (since MSL was introduced). The updates in materials and deck pad improve the responsiveness and ease of handling, and adjusted fin position still helps to offer the improved tracking and manoeuvrability overall and in surf. Handles are now softer and more comfortable and a treat to use to and from the water and getting back on the board. Nose handle is a great addition for pulling the board through surf/waves, especially with a child or pet passenger. Cargo area has 6 stainless steel d-rings, it’s very secure with thick bungee cord.
The 2020 Red Paddle Co 10’6″ Ride continues to be a great all round board for paddlers up to 220lbs. It’s the perfect width at 32″, meaning it is enough to be stable but still narrow enough to be manageable to carry on land and easy to paddle on the water. Cruising and turning is pretty easy and the 10’6″ Ride has nice glide. Either standing or kneeling, paddling is comfortable and tracking from the iFin built in fins is quite straight. The 4.72″ thickness is a perfect match between rigidity, performance and manoeuvrability. Thick enough to be rigid and keeping your feet out of the water but not so thick that it feels like you’re riding a cork or feel disconnected from the board or the water.
This is an incredibly easy paddle board for beginners to start on, or intermediates to advanced paddlers to use. Cruising the coastline, SUP Yoga, paddling workouts, riding small to medium surf, slow moving rivers, bays, inlets, intra-coastals, tropical islands, you name it! It is also a great choice for families as the 10’6″ Ride can be enjoyed by all ages, with enough space for a child or 4 legged friend up front. The almost indestructible MSL construction is also paw friendly.
The deck pad is large and comfortable. In 2020, the “red” logo textured finish continues, which is a nice touch yet still provides ample grip for general use and is very forgiving. Also continued for 2020, the tail section of diamond cut textured EVA has a pointed front to it, meaning it extends further forward in the middle of the board, While this fits well with the new and improved deck graphics there is also a functional element here which provides better grip in the center and towards the tail for step back turns. The pointed front edge of the diamond groove deck pad helps locate your foot position when moving on the board. Much like an arch raise on a surf board tail pad. It helps you know where your foot is in relation to the tail and the center of the board without having to look down, in barefoot at least. The diamond texture also provide better grip for getting back on the board to ride waves.
- Length: 10’6″
- Width: 32″
- Thickness: 120mm, 4.72 inches
- Volume: 240 liters
- Weight: 21 lbs board only, 30 lbs with backpack and pump
- Max payload: 220 lbs/100 kg
- Warranty: 1 year, 5 years with product registration
- Slick graphics with attention to visual details that now match the advanced construction and stiffness technologies
- Top quality MSL Fusion construction with “hard-board-like” finish
- Quick inflation with the efficient Titan Pump
- Clever internal packaging in the carry bag for secure transportation of paddle and other accessories
- Nose handle for easier handling, with integrated accessories mount for things like GPS, camera or phone
- Excellent EVA deck pad with pointed diamond texture towards the tail for better feeling and grip
- Stable board, decent glide
- Larger and secure cargo area
- Bomb proof iFins
- Five year warranty with board registration
- Hard pressed to find anything wrong with this board and package. Minor change to graphics doesn’t really differentiate the board from the 2018/19 boards, but that’s purely aesthetic and personal taste. The 5 year warranty more than makes up for any artistic deficiencies
An extremely high quality product from Red Paddle Co who are the outright leader in inflatable paddle board technologies and design – the 10’6″ Ride is still (after several years) my go to board for all round paddling and family fun. Excellent value for money when you consider the excellent quality of the board, bag and pump. I use one, my kids love it, it’s our number 1 selling board. To borrow Red Paddle Co’s own marketing speak, “If you had to choose just one board, this is the one we’d suggest.” I second that statement, you can’t go wrong with this board.
Find all the details here: 2020 Red Paddle Co 10’6″ Ride.
Follow us on YouTube: